Microwave Not Turning On: 7 Causes, Safe Checks and Costs

You press Start and nothing happens. No beep, no light, no display. A dead microwave is one of the most common calls we get, and it is often not the microwave's fault at all. A tripped breaker or GFCI outlet causes a lot of them. When the problem is inside, the fix is usually a small part. But microwaves hold a dangerous charge even when unplugged, so this guide sticks to checks you can do safely.

Call Now – (650) 459-7977
  • Open 24/7
  • Fast response
  • Upfront quotes
  • All major brands
Technician testing the door switches of an over-the-range microwave that won't turn on in a Mountain View kitchen

Why is my microwave not turning on at all?

A microwave with no display and no sound has lost power somewhere. Most often the outlet has no power, from a tripped breaker or GFCI. If the outlet works, the usual suspects inside are a blown line fuse, a failed door switch, a tripped thermal cutout or a dead control board. The first two cause most no-power calls.

A microwave that lights up but will not heat is a different problem. If that is what you see, read our guide to a microwave that runs but won't heat instead. For a dead unit, keep reading. For anything inside the cabinet, book microwave repair in Mountain View rather than opening it yourself.

What are the 7 most common causes?

The seven usual causes are a tripped breaker, a tripped GFCI outlet, a loose plug or cord, a blown internal fuse, a failed door switch, a tripped thermal cutout and a failed control board. The first three are outside the microwave and you can check them yourself. The last four are inside and need a technician.

CauseClueWho fixes it
Tripped breakerOther kitchen items on the circuit are also offYou
Tripped GFCI outletA nearby outlet's button popped outYou
Loose plug or damaged cordWorks when you wiggle the plugYou or a technician
Blown line fuseDead after a pop, or after slamming the doorTechnician
Failed door switchFuse keeps blowing, or works only if you press the doorTechnician
Thermal cutout trippedDied during long cooking, or vents are blockedTechnician
Control board failureDead after a storm or outage, power reaches the boardTechnician

What can you safely check yourself?

You can safely check everything outside the cabinet: the breaker, GFCI outlets, the plug and the door. Do not remove the outer cover. The high-voltage capacitor inside can hold a charge that is dangerous even with the microwave unplugged. These checks take about ten minutes and solve a good share of dead-microwave calls.

  1. Check the breaker panel. Look for a breaker that sits in the middle or off position. Flip it fully off, then on.
  2. Press the GFCI reset buttons. Kitchen GFCI outlets can protect other outlets down the line. Reset every GFCI in the kitchen, garage and nearby baths.
  3. Test the outlet. Plug in a lamp or phone charger. If it does not work, the problem is the outlet or circuit.
  4. Reseat the plug. For over-the-range models, the plug is in the cabinet above. Make sure it is pushed in all the way.
  5. Power cycle it. Unplug or switch off the breaker for 5 minutes, then restore power. This resets the control board.
  6. Check the door. Close it firmly. Look for a broken latch hook or a door that sits crooked.
  7. Check child lock. Some models show nothing until you hold Cancel or Lock for 3 seconds.

Never run the microwave empty to test it, and never bypass a door switch. Those parts are there to stop microwave energy from leaking out.

Why does the fuse keep blowing?

A microwave fuse blows to protect the circuit. If it blows once after a power surge, a new fuse may be all you need. If it keeps blowing, something else is wrong. A failing door switch is the most common cause. A shorted high-voltage diode, capacitor or magnetron can also blow it, so the whole circuit needs testing.

Door switches wear out from years of opening and closing. Slamming the door, or a latch that no longer lines up, makes them fail sooner. That is why we test all of them, usually three or four, when we replace a fuse.

Microwave dead and the outlet works? Call now and a technician can test the fuse, door switches and board safely.

Call Now – (650) 459-7977

How much does a dead microwave repair cost in Mountain View?

Most microwave repairs in Mountain View cost approx. $120 to $350 with parts and labor. A fuse, door switch or thermal cutout sits at the low end. A control board or a built-in brand like Wolf or Thermador sits at the high end. The diagnostic visit is approx. $95 to $150 and is often credited to the repair.

RepairApprox. cost
Diagnostic visit$95 – $150
Fuse, door switch or thermal cutoutLow end of $120 – $350
Control board or built-in modelsHigh end of $120 – $350, sometimes more

See every appliance in our Mountain View repair cost guide.

Should you repair or replace a microwave that won't turn on?

Repair usually makes sense for over-the-range and built-in microwaves, because a new one also needs mounting, venting and sometimes cabinet work. A countertop microwave that is cheap and older than about 8 years is usually better replaced. Use the 50% rule: if the repair is under half the cost of a new unit, repair it.

  • Repair an over-the-range or drawer microwave with a fuse, switch or cutout problem.
  • Repair built-in Wolf, Thermador, Miele or Sub-Zero matched units, which cost a lot to replace.
  • Replace a countertop model when the board or magnetron has failed.
  • Replace any microwave with a rusted cavity or a damaged door seal.

Our repair or replace guide walks through the math.

Why do we see this in Mountain View homes?

Many Mountain View kitchens have over-the-range microwaves that share a circuit with other appliances, and older homes in Old Mountain View, Monta Loma and Rex Manor often have older GFCI outlets that trip easily. Remodeled kitchens near Cuesta Park and Waverly Park often have built-in or drawer units that are worth repairing.

We serve all of Mountain View, ZIP codes 94040, 94041 and 94043, including North Whisman, Shoreline West and Sylvan Park. Power outages during winter storms also cause a spike in dead-microwave calls, as surges hit fuses and control boards.

How do you keep your microwave from dying early?

Close the door gently, keep the vents clear and do not run it empty. Gentle door use protects the switches and latch. Clear vents keep the thermal cutout from tripping. A surge protector or a whole-home surge device helps protect the control board during storms and outages.

  • Do not slam the door or use it as a shelf.
  • Clean the vent grilles and grease filters on over-the-range models every month or two.
  • Avoid running long cook times back to back on high.
  • Have the latch checked if the door starts to stick or sit crooked.

Other common repairs we see in Mountain View

More quick answers: what to do when the microwave fan won't turn off, why a microwave runs but does not heat, and why your dryer turns off after a few minutes. For every other appliance, see our appliance repair Mountain View CA services.

Frequently asked questions

Why is my microwave completely dead?

Start with power: a tripped breaker, a tripped GFCI outlet elsewhere in the kitchen, or a loose plug. If power is fine, the most common causes are a blown internal fuse, a failed door switch, a tripped thermal cutout or a bad control board.

Can I replace a microwave fuse myself?

We do not recommend it. The fuse sits inside the cabinet next to the high-voltage capacitor, which can hold a dangerous charge after the microwave is unplugged. A blown fuse also usually means another part, often a door switch, failed and needs testing.

Is it worth fixing a microwave that won't turn on?

For over-the-range and built-in models, usually yes. A fuse, door switch or thermal cutout repair is often much less than replacing and reinstalling a vented unit. A cheap countertop microwave over about 8 years old is usually better replaced.

How much does microwave repair cost in Mountain View?

Most microwave repairs in Mountain View cost approx. $120 to $350 with parts and labor. The diagnostic visit is approx. $95 to $150 and is often credited to the repair. Control boards and built-in brands sit at the higher end.

Why did my microwave stop working after a power outage?

A power surge can blow the internal fuse or damage the control board. Reset the breaker, unplug the microwave for 5 minutes, then plug it back in. If it stays dead, a technician should test the fuse, thermal cutout and board.

Live 24/7 · Mountain View, CA

Talk to an appliance technician now

Tell us what your appliance is doing. We will quote the visit on the phone and book the first open slot, often the same day.

  • Upfront price before any work
  • All major and luxury brands
  • Fridge and leak calls go first

More appliance repair guides

Need an appliance fixed today?

Call now to talk to a real person, any time of day or night.

(650) 459-7977 Call Now – (650) 459-7977

Our appliance repair services in Mountain View

One call covers every major appliance in your home. Pick a service for signs, costs, and how the repair works.

Call Now – (650) 459-7977