Washer Not Spinning? 6 Causes and What to Check First
Soaking wet clothes after a full cycle usually mean the washer never spun. Most causes are simple. Here is where to start.
Read the guideWhat does washer repair in Mountain View include?
Washer repair in Mountain View covers every part of your washing machine, from the drain pump and lid switch to the motor, door lock, bearings, and control board. Our technician runs a test cycle, reads any error codes, finds the cause, and fixes it on site with a clear price up front.
Many Mountain View homes and apartments have washers tucked into hall closets or stacked with the dryer. We know how to pull these units out without damaging floors or walls. Most washer repairs are done in one visit. If water stays in the drum after a cycle, start with our washer not draining guide.
We fix Samsung, LG, Whirlpool, Maytag, GE, Electrolux, Speed Queen, Bosch, Miele, and Kenmore washers. That includes compact and stacked laundry centers common in Mountain View condos and townhomes.
What are the signs you need washer repair?
You need washer repair if water stays in the drum after a cycle, the drum won't spin, the machine leaks, or it shakes and bangs hard. Error codes that keep coming back and a door that won't unlock are also common signs. Catching these early often prevents a costly motor or bearing failure.
- Water stays in the drum after the cycle ends
- The drum won't spin or spins slowly
- Water leaks onto the floor
- Loud banging or shaking during the spin cycle
- The washer won't fill or fills slowly
- Door or lid won't lock or unlock
- Error codes on the display
- A burning or musty smell during use
How does our washer repair process work?
Our washer repair starts with a short test cycle and an error code check. We then test the pump, valves, lock, and motor to find the fault. You get the full price first, and after the repair we run another cycle to make sure your washer drains, spins, and stays dry.
Test cycle
We run the washer and watch fill, agitate, drain, and spin to see where it fails.
Error code check
Front-load and smart washers store fault codes that point to the problem part.
Upfront quote
You get the part and full cost before the repair begins.
Repair and leak check
We install the part and run a full cycle, checking for leaks and noise.
How much does washer repair cost in Mountain View?
Washer repair in Mountain View usually costs approx. $150 to $450. Clearing a clogged drain pump or replacing a lid switch is at the low end. Door locks, inlet valves, and pumps are mid-range. Motors, control boards, and drum bearings cost the most, and bearing jobs on front-loaders can approach the price of a new washer.
| Repair | Typical cost (approx.) |
|---|---|
| Drain pump clean or replace | $150 – $300 |
| Lid switch or door lock | $150 – $300 |
| Water inlet valve | $175 – $325 |
| Drive motor or control board | $300 – $500 |
| Drum bearings (front-load) | $400 – $650 |
Prices are approx. ranges for Mountain View and nearby cities, including parts and labor. They are not a quote. Your technician gives a firm price after diagnosis.
Should you repair or replace your washer?
Repair your washer if it is under 8 to 10 years old and the fix is a pump, valve, lock, or belt. If a front-loader needs new drum bearings and is over 10 years old, replacement may be the better value. We will tell you plainly which way makes sense.
| Situation | Our usual advice |
|---|---|
| Pump, valve, belt, or lock | Repair |
| Control board, under 8 years | Repair |
| Bearings, over 10 years | Often replace |
| Rusted tub or cracked drum | Replace |
What can you safely check before calling?
Before you call, try a few safe checks. Make sure the water taps behind the washer are fully open and the hose is not kinked. Clean the drain filter on front-loaders. Always unplug the washer before you open any panel, and never bypass the door lock.
- Clean the coin trap or drain filter at the bottom front
- Check inlet hose screens for grit if the washer fills slowly
- Use HE detergent only, and less than you think
- Leave the front-load door open after use to stop mold
- Level the washer if it walks or bangs during spin
Need washer repair today? Call now and talk to a real person.
Call Now – (650) 459-7977Related appliance repair services
We fix every major appliance in your home, so one call covers it all.
Dryer Repair
No heat or no tumble? We fix gas and electric dryers and clear vent problems.
Dryer Repair in Mountain ViewDishwasher Repair
Dirty dishes or standing water? We repair pumps, valves, and control boards.
Dishwasher Repair in Mountain ViewRefrigerator Repair
Fridge warm, leaking, or noisy? We fix cooling, defrost, and sealed system problems.
Refrigerator Repair in Mountain ViewWhere do we offer washer repair?
We offer washer repair across Mountain View, CA, including ZIP codes 94040, 94041, and 94043, in every Mountain View neighborhood:
- Old Mountain View
- Monta Loma
- Cuesta Park
- Waverly Park
- Rex Manor
- North Whisman
- Shoreline West
- Sylvan Park
- Blossom Valley
- Whisman Station
- North Bayshore
- Castro City
Washer Repair guides for Mountain View homeowners
Answers to the questions we hear most. See all guides.
Washer Not Filling With Water? 6 Causes and Quick Fixes
A washer that won't fill, or fills very slowly, often has a closed valve, a kinked hose or a clogged screen. Here is what to check.
Read the guide
Washer Not Draining? 6 Causes and What to Check First
Standing water at the end of a cycle usually means a clog, a kinked hose, or a failed pump. Here is how to find which one, step by step.
Read the guideWasher Shaking or Walking During the Spin Cycle? Causes and Fixes
A washer that bangs or walks during spin is usually unbalanced, not level, or has worn suspension parts. Here is how to find the cause.
Read the guide
Front-Load Washer Smells Bad? How to Get Rid of the Odor for Good
That musty smell comes from moisture, soap residue, and lint trapped in the gasket, drum, and filter. Here is how to clean it and keep it away.
Read the guide
Should You Repair or Replace Your Appliance?
Use the 50% rule, typical appliance lifespans, and a few simple questions to decide whether to fix your appliance or buy a new one.
Read the guide
How Much Does Appliance Repair Cost in Mountain View in 2026?
Typical 2026 repair prices for every major appliance in Mountain View, what makes a repair cost more, and your rights to a written estimate in California.
Read the guide
Dryer Running but Not Heating? Causes for Gas and Electric Dryers
If your dryer tumbles but the clothes stay cold, the cause is usually a fuse, heating element, igniter, or gas valve. Here is how to narrow it down.
Read the guideWasher Repair FAQs
Why won't my washer drain?
The most common cause is a clogged drain pump filter or a kinked drain hose. A coin, sock, or hair tie can block the pump. If the filter is clear and it still won't drain, the pump motor may have failed.
How much does washer repair cost in Mountain View?
Most washer repairs cost approx. $150 to $450 with parts and labor. Bearing replacements on front-load washers can cost more. You get the price first.
Why does my washer shake so much during spin?
An unbalanced load is the usual cause. If it shakes with every load, the shock absorbers, suspension springs, or drum bearings may be worn.
Is it worth repairing a washer that is 10 years old?
Yes, for most pump, valve, and lock repairs. A 10-year-old front-loader that needs bearings is often better replaced.
Can you fix a washer that smells musty?
Yes. We can clean the door boot, drain pump, and hoses, and check for a slow drain that leaves water sitting in the machine.
Do you repair stacked washer and dryer units?
Yes. We repair stacked and all-in-one laundry centers and can safely move them to reach the parts.
Why is my front load washer not draining?
On most front load washers, a clogged drain pump filter behind the small front panel is the cause. Coins, hair and lint block it. Our guide to the front load washer drain pump filter shows how to clean it safely.