Oven Convection Fan Not Working? 6 Causes and What to Do
A convection fan that will not spin is usually a failed fan motor, a seized blade, a door switch or a relay on the control board. Here is how to narrow it down.
Read the guide
How much does appliance repair cost in Mountain View?
Most appliance repairs in Mountain View cost approx. $150 to $450, including parts and labor. A diagnostic visit is usually approx. $95 to $150. Refrigerator sealed system work and repairs on high-end built-in brands can cost more.
These are approximate ranges based on common repairs in the area. They are not a quote. Your technician gives you a firm price after testing the appliance.
What are typical prices by appliance?
| Appliance | Typical repair (approx.) | Common fixes |
|---|---|---|
| Refrigerator | $200 to $600 | Fan motor, defrost parts, start relay, control board |
| Washer | $150 to $450 | Drain pump, door lock, lid switch, bearings |
| Dryer | $150 to $400 | Heating element, igniter, belt, rollers, thermal fuse |
| Dishwasher | $150 to $400 | Drain pump, inlet valve, heater, door latch |
| Oven | $150 to $500 | Bake element, igniter, temperature sensor |
| Stove or cooktop | $150 to $450 | Igniter, spark module, burner switch |
| Ice maker | $150 to $400 | Ice maker assembly, water valve, fill tube |
| Microwave | $120 to $350 | Magnetron, door switch, diode, control board |
You can also see these ranges in the cost section on our homepage.
What makes a repair cost more?
The part, the brand, and the labor time drive the price. An igniter or belt is usually a quick, low-cost fix. A control board or compressor on a built-in luxury model can cost several hundred dollars in parts alone.
- The part. Belts, switches, and igniters are inexpensive. Control boards and compressors are not.
- The brand. Sub-Zero, Wolf, Thermador, and Miele parts usually cost more than everyday brands.
- Access. Built-in and stacked units take longer to reach.
- Sealed system work. Refrigerant repairs need certified technicians and special equipment, as required by the EPA's Section 608 rules.
- Part availability. Older models may need a part ordered, which can mean a second visit.
Want a real number for your appliance? Call us for an upfront diagnostic price and a firm quote before any work.
What are your rights as a customer in California?
In California, appliance repair dealers must give you a written estimate with the total price before they start, and get your approval before doing extra work. You do not have to pay for repairs you did not authorize.
These rules are explained in the Bureau of Household Goods and Services appliance repair FAQ. The Bureau's website also lets you look up a repair dealer's registration before you book.
How can you save on appliance repair?
- Find your model number before you call. It helps the technician bring the right parts.
- Do the simple checks first, like cleaning filters, coils, and lint screens.
- Ask for the total price before work starts.
- Book early when a problem starts, before a small fault damages other parts.
- Keep up with basic maintenance to avoid larger repairs later.
If the repair price is close to the cost of a new appliance, read our guide on whether to repair or replace. When you are ready to book, contact us any time. Our line is open 24/7.
Frequently asked questions
How much is a diagnostic visit in Mountain View?
A diagnostic visit usually costs approx. $95 to $150. Many companies, including ours, explain the fee before the visit and give you a firm repair price before any work starts.
What is the most expensive appliance repair?
Sealed system work on a refrigerator, such as a compressor or refrigerant leak, is usually the most costly. Control boards on high-end built-in appliances can also be expensive.
Do I have to pay for repairs I didn't approve?
No. California's appliance repair rules require a written estimate with the total price before work starts, and you do not have to pay for work you did not authorize.
