Dishwasher Not Draining but No Blockage? 7 Hidden Causes

You pulled the filter, rinsed it, cleared the sump, and the dishwasher still ends the cycle with water in the bottom. That is frustrating, but it narrows things down. When nothing is blocking the tub, the problem is in the drain path under the sink or in the parts that push the water out.

Call Now – (650) 459-7977
  • Open 24/7
  • Fast response
  • Upfront quotes
  • All major brands
Open stainless dishwasher in a Mountain View kitchen with the racks pulled forward and the sump and filter area visible at the bottom of the tub

What does "no blockage" really rule out?

If the filter is clean and the sump under it is clear, you have ruled out the most common cause, which is food and debris in the bottom of the tub. What is left is the drain path after the pump, like the hose, air gap and disposal, and the parts that move the water, like the pump, check valve and controls.

Before you start, unplug the dishwasher or switch off its breaker. Have towels, a small cup, a flashlight and a screwdriver ready. If you have not checked the basics yet, our guide on a dishwasher that won't drain covers the filter and sump first.

CauseWhere to lookDIY or pro
1. Clogged air gapCap on the sink or counterDIY
2. Disposal knockout plugDisposal inlet under the sinkDIY
3. Missing high loop or kinked hoseDrain hose under the sinkDIY
4. Clogged disposal or sink drainDisposal and sink trapDIY or plumber
5. Stuck check valveWhere the hose meets the pumpUsually pro
6. Failed drain pump or impellerUnder the tubPro
7. Control, door switch or float problemControl board, door latch, floatPro

Is the air gap clogged?

The air gap is the small chrome or white cap near the faucet. Water from the dishwasher passes through it on the way to the disposal or drain. Food and grease can clog it, so water backs up into the dishwasher or spills out of the cap onto the counter. Pull the cover off, unscrew the inner cap and clean it out.

Many Mountain View homes, from older ranch houses in Cuesta Park to newer condos near Castro Street, have an air gap because local plumbing code often requires one. Clean it with a bottle brush or a pipe cleaner, then run water through it. If water still spills out of the air gap when the dishwasher drains, the clog is further down, in the hose or the disposal inlet.

Did a new disposal block the drain?

New garbage disposals come with a plastic plug inside the dishwasher inlet. If the installer did not knock it out, the dishwasher cannot drain at all, even though everything looks fine. This is one of the most common causes when a dishwasher stops draining right after a disposal was installed or replaced.

  1. Switch off the disposal at the breaker or unplug it.
  2. Loosen the clamp and pull the dishwasher hose off the disposal inlet.
  3. Look inside the inlet with a flashlight. A solid plastic disc means the plug is still there.
  4. Tap it out with a screwdriver and hammer, then fish the plug out of the disposal with tongs.
  5. Reattach the hose and tighten the clamp.

Also run the disposal for a few seconds with water before you start the dishwasher. A disposal full of food can block the dishwasher inlet too.

Is the drain hose set up correctly?

The drain hose should rise in a high loop up to the underside of the counter before it drops down to the disposal or drain. Without that loop, sink water can flow back into the dishwasher. A hose that is kinked behind the dishwasher or crushed by storage bins under the sink can also slow draining to a trickle.

  • Check that the hose is clipped or strapped high under the counter.
  • Pull out cleaning supplies and look for kinks or flat spots.
  • If the dishwasher was recently pushed back in, the hose may have folded behind it.
  • Disconnect the hose at the disposal and blow through it, or flush it with water over a bucket.

Drain path is clear and there is still water in the tub? Call for a dishwasher drain repair in Mountain View before it starts to smell.

Call Now – (650) 459-7977

Could the check valve be stuck?

The check valve is a small flap or ball where the drain hose connects to the pump. It lets water out and stops dirty water from coming back in. If it sticks closed with grease or a piece of glass, the pump runs but water cannot leave. If it sticks open, dirty water flows back into the tub after the cycle.

Signs of a check valve problem:

  • The pump runs and sounds normal, but the water level barely drops.
  • Dirty water returns to the bottom of the tub an hour or so after the cycle ends.
  • Small food bits show up on clean dishes.

On many models the valve sits inside the pump housing, so reaching it means taking off the bottom panel and tilting the dishwasher. That is a job most people leave to a technician.

How can you tell if the drain pump failed?

Start a cycle, wait a minute, then press cancel or drain so the dishwasher tries to pump out. Listen at the bottom of the door. No sound at all can mean a dead pump or no power reaching it. A hum with no water moving can mean a jammed impeller or a failing motor. A grinding sound often means glass or a pit in the impeller.

Some brands, like many Bosch and other European models, also use a separate drain pump with its own filter screen, and some older models use a drain solenoid that opens a valve. If you hear the pump running loudly but no water moves, our article on a dishwasher humming but not draining walks through the impeller check.

Mountain View's water comes mostly from the Hetch Hetchy system, which is soft. That helps, but detergent buildup, fruit labels and broken glass still end up in pumps.

What if the dishwasher never starts the drain cycle?

If the pump never even tries, the problem may be electrical. A faulty door switch, a stuck float switch, a bad wire to the pump or a failing control board can all skip or stop the drain step. These faults often come with blinking lights or an error code on the panel. They need a meter to test safely.

Write down any code on the display and the brand and model number from the label on the inside edge of the door. That helps a technician bring the right part.

What does dishwasher drain repair cost in Mountain View?

Most dishwasher repairs in Mountain View cost about $150 to $450 with parts and labor. A drain pump, check valve or drain hose replacement usually falls in that range. The diagnostic visit runs about $95 to $150 and is often credited toward the repair if you go ahead.

RepairApprox. cost in Mountain View
Diagnostic visit$95 – $150
Drain hose or air gap replacementLow end of $150 – $450
Check valve replacementWithin $150 – $450
Drain pump replacementWithin $150 – $450
Control board or door switchWithin $150 – $450, high end for boards

Our team handles dishwasher repair in Mountain View for Bosch, Miele, KitchenAid, Whirlpool, GE, Samsung, LG and Thermador. We cover ZIP codes 94040, 94041 and 94043, from Old Mountain View and Rex Manor to Waverly Park and Shoreline West.

Other kitchen and laundry problems we fix in Mountain View

Is your electric oven not working but stove top is still heating? That usually points to one part. In the laundry room, see why a dryer turns off after a few minutes and what to clean first.

Frequently asked questions

Why is my dishwasher not draining when nothing is clogged?

If the filter and sump are clear, check the air gap on the sink, the garbage disposal inlet, the drain hose high loop and any kinks under the sink. If those are fine, the drain pump, its impeller, the check valve or a drain solenoid may have failed. A control board or door switch problem can also stop the drain cycle from starting.

How do I know if my dishwasher drain pump is bad?

Start a cycle, then cancel it so the dishwasher tries to drain. If you hear no pump sound at all, or a hum with no water moving, and the hose and air gap are clear, the pump is the likely cause. A technician can test the pump for voltage and resistance to confirm before replacing it.

Can a new garbage disposal stop a dishwasher from draining?

Yes. New disposals come with a plastic knockout plug inside the dishwasher inlet. If the installer did not punch it out, the dishwasher has nowhere to drain. Unplug the disposal and check the inlet with a flashlight or a screwdriver.

What does a dishwasher air gap do?

The air gap is the small metal or plastic cap on the sink or counter. It keeps dirty sink water from flowing back into the dishwasher. If it clogs with food, water may spill out of it or stay in the dishwasher. Pull off the cover, remove the cap and clean out the debris.

Is it worth repairing a dishwasher that won't drain?

Usually, if the dishwasher is under about 8 to 10 years old. Most drain repairs in Mountain View cost about $150 to $450, including a pump or check valve. If the tub is rusting or the dishwasher has other major problems, replacement may make more sense.

Live 24/7 · Mountain View, CA

Talk to an appliance technician now

Tell us what your appliance is doing. We will quote the visit on the phone and book the first open slot, often the same day.

  • Upfront price before any work
  • All major and luxury brands
  • Fridge and leak calls go first

More appliance repair guides

Need an appliance fixed today?

Call now to talk to a real person, any time of day or night.

(650) 459-7977 Call Now – (650) 459-7977

Our appliance repair services in Mountain View

One call covers every major appliance in your home. Pick a service for signs, costs, and how the repair works.

Call Now – (650) 459-7977